Toyota Camry 2016 All Key Lost, Add New Key with IM508 and APB112
How to add a new smart key by OBD when all key lost on Toyota Camry 2016? Autel MaxiIM IM508 key programmer and APB112 simulator can do all key lost and generate a new smart key on Toyota Camry 2016 via OBD.
- Test Vehicle Model: Toyota Camry 2016
- Key Chip: 8A
- Programming: All Key Lost, Add New Smart Key
- Tool Required: Autel IM508 with XP400, APB112 smart key simulator
In the following video, You will get to know how to program a new smart car key by OBD with AUTEL IM508 and APB112 on Toyota Camry 2016.
Toyota Camry 2016 add new smart key Main steps:
- Reads and Back up Immobilizer Data
- Generate Simulator Key By The Backup Data
- Add New Smart Key With The Simulator
How to do All Key Lost on Toyota Camry 2016?
Connect Autel IM508 to Toyota Camry OBD port, and connect Autel APB 112 to IM508 first, like the picture show.
Following is the step by step tutorial
Step 1. Click IMMO Icon on IM508 MaxiIM Main Menu
Step 2. Identify the vehicle: Click Toyota->Manual Selection->Other->Camry
Now you're going to identify the vehicle, then click Toyota, manual selection, and just click other for this, scroll over and click Camry on model screen
Step 3. Click on Smart Key
Step 4. Click on Keyless System(CAN)
Step 5. Back up Immobilizer Data
Back up Immobilizer Data function is used to back up the EEPROM data of the smart box of the vehicle. The data can be used to generate the simulator key for the emergency start of the vehicle to perform the key matching function.
After clicking the "Back up Immobilizer Data" button next screen will show you the info about back up, read it and press "ok" to continue. Please ensure im508 connect to the network first, then the screen will show "Reading immobilizer data", wait for about 10 seconds, you will go to the file screen, write a name file you customized and press "ok" to save your back up data. Once everything is done the screen will prompt you "back up success".
Step 6. Generate Simulator Key
After finished back up Immobilizer data then you can go on the next step and generate a simulator key.
Clicking the "Generate Simulator Key" button then Select the EEPROM data which is the backup data you saved just now, after selecting the backup data and press "ok", your screen will show "Retrieving critical data…" about 10 seconds later, your screen will show the key type such as "Key Type:SLK3",
It will prompt you to connect APB112 key simulator, press “OK” to continue, Burning firmware please wait… a few seconds later, the Autel IM508 programmer shows you the simulator key is generated successfully. Then put the simulator key on start/ Stop button and press, it can be used to turn on and start your car.
A simulator key is generated successfully!
Step 7. Add New Smart Key
Back to menu to select “Add Smart Key”, then it will show you "do you want to used this simulator?" press “Yes” it means you will use the simulator key to add a new smart key, then It will prompt you "the positions for learning include:5", just Click “OK” and continue.
Two important operates
- Put the simulator key APB112 close to the START button, when the device sounds a beep, then remove simulator key.
- Put the new smart key to learned close to the start button, when the device sounds “Beep Beep”, then remove the new smart key from START button.
Finished the above steps, the screen will show in Registering, please wait… a few seconds later, it will show you learning succeed. Now you have a new smart key on vehicle!
A new smart key has generated successfully!
Step 8. Test Smart Key Remote Function
Step 9. Test Start/ Stop Button
Test the new smart key on your vehicle.
The tools of the Im508 and the APB112 are highly recommend to do all key lost for Toyota and Lexus. In reference to the step by step tutorial, you will program a new smart key on your Toyota Camry 2016 easily.